S90 L6-2.9L VIN 96 B6304S (1998)
Remove, on right-hand side:
-
soundproofing panel under glove box
-
glove box.
-
Remove evaporator cover.
First disconnect vacuum hose from vacuum tank
-
withdraw evaporator carefully.
Note:
Drain and measure quantity of oil in original evaporator. Fill new evaporator with same quantity of fresh oil. See specifications for correct
quantity of oil.
Installation
-
Insert evaporator carefully in heater housing.
-
Refit evaporator cover.
-
Connect vacuum hose to vacuum tank.
-
Install foam rubber seal and plate washer on lead-through in firewall.
-
Tighten washer.
-
Reinstall air receiver on suspension strut tower.
Reconnect:
-
pipe connnections to receiver and evaporator