S90 L6-2.9L VIN 96 B6304S (1998)
Power Door Lock Control Module: Service and Repair
Reprogramming of receiver module
Both the transmitter's key codes are preprogrammed to the receiver module when the car is delivered, but can be reprogrammed if necessary, for
example, if a new transmitter is installed.
When reprogramming the receiver it is important that each unique key code is entered. The receiver can store up to 3 transmitter codes in its memory.
Before starting reprogramming a check should be made that the remote control transmitter uses the same frequency as the receiver. The receiver module
is marked with a letter as shown in the illustration. The part number of the receiver is engraved on underside of the receiver.
NOTE: New frequencies can be introduced later.
Marking receiver module
P/N Transmitter
A (9148647)
9148646
C (9128710)
9128709
H (9128928)
9128927
To reprogram the receiver module do the following:
-
Turn on the ignition to position I or II five times within the space of 10 seconds and leave the ignition on the fifth time.
-
Within 30 seconds press one of the keys LOCK or UNLOCK on the transmitter once.
All the transmitters must be reprogrammed within a period of 30 seconds.