S90 L6-29L VIN 96 B6304S (1998) Side Air Bag Service Procedures
Side Air Bag: Service and Repair
Scrapping
For Deliberate Release Of SIPS Bag, Volvo Recommends The Following:
If the Car is to be scrapped, the SIPS bag should be released in place in the car.
If a removed SIPS bag is to be scrapped, the SIPS bag cushion module should be placed in a vise before release.
WARNING: Make sure that no one is in the car and no one is in front of the SIPS bag, when the SIPS bag is released. Release of a loosely
clamped or unclamped SIPS bag can cause personal injury.
NOTE: Safety glasses and hearing protection should be used during this procedure.
Fig. 30 Side Impact Air Bag System Deployment Inside Vehicle
If car is to be scrapped
-
Turn ignition off.
Make sure that SIPS bag is securely fastened to the seat and there are no loose parts around the SIPS bag.
-
Attach transport safety device to sensor unit.
-
Remove sensor unit and free firing circuit from cable ties and clips.
-
Close front doors and windows.
-
Pull sensor unit to floor behind seat.
-
Remove transport safety device from sensor unit.
-
Stand outside the car and hit the middle of the sensor unit with a hammer.
