S90 L6-2.9L VIN 96 B6304S (1998)
Installing Seat Belt Tensioner And Seat Belt
WARNING: Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed
pyrotechnical seat belt tensioner. This could deploy the seat belt tensioner!
Install:
-
Seat belt to seat mounting (1 x 16 mm screw). Seat belt tightening torque = 22 ft lbs.
-
Seat belt to B-post mounting (1 x 16 mm screw). Seat belt tightening torque = 22 ft lbs.
-
Seat belt to B-post (1 x 16 mm screw). Seat belt (inertia) reel tightening torque = 22 ft lbs.
-
The seat belt tensioner (1 x Torx 25). Seat belt tensioner tightening torque = 1.8 ft lbs.
Installing Seat Belt Tensioner Connector
WARNING: The battery should not be connected when SRS ignition cable igniter connector is removed or installed.
-
Connect SRS ignition cable igniter connector to seat belt tensioner.
Installing B-Post Inner Panel
