S90 L6-2.9L VIN 96 B6304S (1998)
Replacing cooling loop
1
Block off the return hose to the reservoir with a hose plier/clamp.
Remove:
-
splashguard under engine,
-
hose clamps from connections on cooling loop,
-
screws for the anti-roll bar bracket,
-
cooling loop
Install new cooling loop.
Pull down the roll bar 5 mm (1/4") and insert the bracket for the loop between the frame rail and the anti-roll bar bracket.
Install screws for anti-roll bar bracket.
Replacing return line
2
Removing return line
Remove return line from steering gear.