S90 L6-2.9L VIN 96 B6304S (1998)
Control Arm: Service and Repair
Upper Link
Removal
TOOL REQUIRED
-
999 5045 Hook
-
999 5087 Counterhold
-
999 5244 Socket
-
999 5343 Drift
-
999 5345 Drift
-
999 5347 Drift
-
999 5569 Press Tool
-
999 5575 Puller Cylinder
-
999 5576 Hydraulic Pump
-
999 5577 Compression Tool
-
999 5586 Counterhold
-
999 5595 Drift
-
999 5972 Universal Fixture
1. Raise the car.
-
Locate the rear arms of the lift so they do not obstruct the support arm of the vehicle.
2. Remove the wheel.
3. Install compression tool No 999 5577, or equivalent.
-
Apply the compression tool lightly against the link.
4. Remove the damper screw.
-
Remove the damper from the support arm.
-
Remove the anti-roll bar screws in the support arm on both sides.
5. Press compression tool up to normal position.
6. Remove the brake caliper.
-
Hang caliper up with a steel wire.
-
Remove the nut to the link bushing.
-
Tap off the bushing screw so that it releases from the wheel bearing housing.
Use a brass drift.
