S90 L6-2.9L VIN 96 B6304S (1998)
Removing Solenoids SL and STH
-
Remove fluid strainer (3 screws).
-
Remove solenoid retainer.
-
Withdraw solenoids SL and STH from control system.
-
Install new solenoids SL and STH.
-
Install solenoids SL and STH complete with retainer and screws. Tighten to 10 Nm (7.5 ft lb).
-
Clean fluid strainer carefully
-
Inspect strainer and seals. If required, replace strainer and seals as a unit.
-
Install strainer.
-
Tighten screws to 10 Nm (7.5 ft lb).
Installing New Solenoids S1 And S2
-
Lubricate new solenoid 0-rings lightly with Vaseline. Install solenoids S1 and S2 with common screw. Tighten to 10 Nm (7.5 ft lb).