S90 L6-2.9L VIN 96 B6304S (1998)
Shifter A/T: Service and Repair
Replacement Of Gear Lever Knob
-
Pull knob straight upward from lever Considerable force is required to remove knob.
-
Install new knob.
-
Ensure that plastic collar is in place and correctly positioned.
Removal Of Gear Selector Unit
-
Disconnect control rod.
-
Jack up car.
-
Disconnect control rod from gear lever arm by removing clip.
-
Disconnect battery ground lead.
-
Remove soundproofing panels on each side.
-
If gear selector unit is to be replaced, remove gear selector knob and plastic ring.
-
Remove:
ashtray
center console screws in storage compartment and at front of panel
console panel screws