S90 L6-2.9L VIN 96 B6304S (1998)
Differential Case: Service and Repair
TOOL REQUIRED
-
999 5088 Drift
-
999 5579 Holder
-
999 5580 Holder
-
999 5972 Universal Fixture
-
Or Equivalent
1. Removal of lower rear axle beam.
2. Remove screws to propeller shaft intermediate bearing.
3. Locate the lift unit with fixture the differential.
a. Adjust the supporting arms and raise the lift until it in contact with the differential.
b. Remove retainer from differential.
4. Carefully lower the differential housing.
a. Lower approximately 50 - 60 mm. So that no breaks occur in the propeller shaft.
b. Remove:
-
The front bushing halves.
-
The rear bushings. Use a screwdriver against the bushing inner sleeve.
-
Tap off the bushing from the differential.