V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Antenna: Service and Repair
Power Antenna Rod, Replacement
Power antenna rod, replacement
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Removing antenna rod
Clean the area around the antenna head.
Pull out the antenna rod with the radio switched on (leave the radio switched on).
Note! If the antenna rod cannot be completely pulled out, pull it out using force.
Remove:
-
the nut (1)
-
the adapter (2)
-
the antenna rod (3) by pulling it out of the mechanism using force.
Pull out both the antenna rod and the nylon strip fully.
Installation
Installing the antenna rod