V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Body Control Module: Service and Repair
Replacing central electronic module (CEM)
Remove central electronic module (CEM)
Preparations
-
Make a note of the radio code.
-
Turn ignition key to position 0 and disconnect battery ground lead.
Note! Before renewing the central electronic module, read out all settings via VIDA carcommunication.
Remove lower panel, drivers side
-
Remove the panel under the dashboard on the drivers side.
-
Disconnect the courtesy lightening wiring.
Note! Procedures and components are mirrored for right-hand drive (RHD) cars.
Remove central electronic module (CEM)
