V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Rear Door Window Regulator: Service and Repair
Rear door window mechanism
Replacing rear door window mechanism
Removing rear door window mechanism
-
Remove the door panel, see Tailgate See: Trunk / Liftgate/Service and Repair/Removal and Replacement/Tailgate.
-
Remove the insulation partly.
-
Wind down window and remove securing screws (A) (2x).
-
Push window upwards and secure to the top with tape.
-
Remove window mechanism mounting (B) (4x bolts).
-
Remove mounting by winder or motor (C) (3x bolts).
-
Electric window: undo connector and remove window mechanism through the top gap.
-
Remove mechanism, turn mechanism in the door and remove it via the upper top gap.
Note! First take out the under side, then the upper side and finally the mechanism.
Note! On electric windows, first turn the mechanism and remove through the top gap with the motor first.
Note! The window mechanism is only supplied as an assembly.
Installing rear door window mechanism