V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
-
Remove the front fender extensions (2 self tapping screws)
-
Remove the three retaining clips under the sill trim
-
Carefully pull off the sill molding from the front and rear bodywork.
Note! The sill molding is secured using tape.
-
Slide the door trim strip forwards and remove it
-
Checking the mountings
-
Apply double-sided adhesive tape P/N 1160053 at the front and rear of the door trim strip
-
Position the door trim strip and slide it backwards
-
Install the three retaining clips.
Note! Install the front fender extensions on the front fender (use double sided tape).
Replacing the roof trim