V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Power Door Lock Actuator: Technical Service Bulletins
Power Locks - Door Central Locking Motor Replacement
S40/V40
2000-
Section
8
Group
83
No.
0039
Year
03
Month
05
Central locking motor in the front and rear doors, securing/changing
Background:
This Service bulletin describes a new method for the installation or replacement of the central locking motors and a corrective action to the locks when
replacing the doors.
Affected vehicles
Model
Factory
Chassis No.
S40, V40
000001 - 942620
Lock, handle Central locking motor, installation
Description of the central locking motors, front and rear doors
1
The inner lock assembly must be removed if the motor is to be replaced.
Note!
Use the illustrations to determine which version applies!
Version A: No extra mounting for the motor.
Version B: (chassis no -94 2619): from the 2000 onwards, a bracket was installed at the bottom of the motor. The bracket is secured in the door panel.
Version C: (chassis no 94 2620-): The motor is secured by a screw in the door panel.
