V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Power Seat Switch: Service and Repair
Side panel and control panel power seat, replacing
Note! The illustrations in this service information are used for different model years and / or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removing the side panel
Remove:
-
the cover on the side by pressing in the locking tab at the upper edge. Pull the cover upwards and out
-
the mounting for the seat belt
-
the mounting screw
-
the panel by lifting it at the rear edge and then pushing it forwards.
Disconnect the panel connectors under the seat and disconnect the cable harness.
Removing the control panel