V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
-
Remove the A pillar panel.
-
Remove the sill trim (at the front 2 x screws).
-
Pull the weatherstrip off.
-
Press the weatherstrip on, starting in the upper corner by the B pillar.
Note! Ensure that the strip is applied properly over the panels.
Note! The strip must be under the panel at the B pillar panel.
-
Apply a soap solution by the dashboard (if necessary, undo the bottom dashboard bolt).
-
Install sill trim.
-
Install the lower A pillar panel.
Replacing boot lid/tailgate weatherstrip