V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Position the steering column. Install the lower screws for the steering column. Tighten the lower screws. Tighten to 25 Nm.
Install
-
the vacuum reservoir in cars with cruise control. Tighten to 10 Nm
-
both the steering column covers
-
the battery negative lead.
Checking the stop lamp switch
Check that the stop lamp lights when the brake pedal is pressed down approximately 5 mm.
If necessary, adjust the stop lamp switch. See Stop lamp switch, adjustment See: Lighting and Horns/Brake Light Switch/Adjustments.
Install the lower cover for the dashboard.
Replacing The Brake Pedal And / Or Bearing Bushings On Right-Hand Drive Cars
Replacing the brake pedal and / or bearing bushings on right-hand drive cars
Preparations
