V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
caliper
-
Turn the brake piston back fully and remove the tool.
Installing the rear brake pads
Install the wear indicator (A) on the under side of the inner installed brake pads. Install the brake pads. Position the brake caliper. Install the new
locking bolt. Tighten to 33 Nm.
Install the brake hose in the support. Install the retaining clip.
Note: Secure adhesive foil onto the steel plates to prevent the rear brake pads from rattling.
Installing the wheels
Checking the brake fluid level
Warning: Always depress the brake pedal repeatedly before test driving the car!
Check the brake fluid level.
Check the parking brake adjustment.