V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Install:
-
The master cylinder. The lug in the power brake booster must be correctly positioned in the master cylinder
-
the brake pipes on the master cylinder. Tighten by hand
-
the 2 nuts for the master cylinder. Tighten to 20 Nm
-
the connector for the brake fluid level sensor.
Filling the brake fluid reservoir
Fill the brake fluid reservoir. Turn the cap nut for the brake pipes so that they are sealed when the brake fluid begins to seep out.
Tighten to 14 Nm.
Installing the relay box
Install the relay box. Tighten to 10 Nm.
Bleeding brake systems
Bleed:
-
the brake system.
Final check
-
Read off and erase any diagnostic trouble codes (DTCs)
-
Test drive the car.
-
Check whether any diagnostic trouble codes (DTCs) have been stored. Read off any stored DTCs.
