V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Install
-
the four nuts, tighten to 25 Nm.
-
the pin, ring and retaining spring on the push rod.
-
MT: clutch pedal on the push rod with pin and retaining spring.
-
relay holder and control module support, torque 10 Nm.
Check the brake light switch.
Install the dashboard panel.
Installing components in the engine compartment
Install
-
the vacuum hose to the power brake booster.
-
the brake pipe support on the inside of the wing.
-
the battery negative lead.
Check the position of the throttle cable.
Fix the airco-pipe in place.
Installing master cylinder