V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Coolant Temperature Sensor/Switch (For Computer): Diagnostic Aids
Examples Of Correct Terminal Crimping
Examples of correct terminal crimping
Checking crimping results
A correctly crimped cable should look like this:
-
Core wings (1) should be completely pressed over the stripped core of wire.
The first illustration shows the copper strands in the core in cross section where they are completely compressed and covered by the core wings.
-
Insulation wings (2) should be completely pressed over the cable insulation.
If a seal is used for cable terminal it should be pressed under the insulation wings as shown in the illustration.
Check the position of the cable
