V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Choose a terminal removal tool with the correct diameter
There are two cavity opening sizes.
See illustration.
Choose a terminal removal tool which matches the cavity opening.
-
The smaller end is for diameter 2.1
-
The larger end is for diameter 3.5
Press the cable terminal in the cavity forwards as far as it will go to free the locking tab from the cavity catch.
Insert the terminal removal tool in the groove as illustrated.
Always follow the instructions in Using terminal removal tools See: Extracting the Cable Terminal From the Housing/Using Terminal Removal Tools
which give the correct working procedure.
-
Proceed to chapter New cable terminal See: Replacing Cable Terminals/New Cable Terminal Seal SWS and plug See: Replacing Cable
Terminals/Seal SWS and Plug. Replacing a cable terminal in order to crimp a new cable terminal.
Single Terminal Housings
Single terminal housings
Cable terminals without locking tab
