V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
-
Hold the eccentric secure and tighten the centre screw. Torque tighten to 20 Nm .
Tightening timing gear pulley
-
Tighten the centre screw on the timing gear pulley with VVT. Tighten to 90 Nm.
-
Install the plug. Tighten to 35 Nm .
-
Install the third screw on the camshaft without VVT. Tighten to 20 Nm .
-
Remove the adjustment tools.
Check
-
Press the belt to check that the indicator on the tensioner moves easily.
-
Position the upper timing cover.
-
Turn the crankshaft two turns. Check that the markings on the crankshaft and camshaft pulley correspond
Note!
Check that the indicator on the belt tensioner is within the marked area.
-
Remove the upper timing cover.
Installing the timing covers