V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Remove:
-
the screws for the timing gear pulley. Use counterhold 999 5199 COUNTERHOLD See: Tools and Equipment/999 5199 Counterhold
-
the timing gear pulley
-
tool 999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
-
the screw holding the inner timing cover to the cylinder head.
Timing gear pulleys without variable valve timing units: - Remove the timing gear pulley. - Remove tool 999 5452
Secure the crankshaft position
Install the adjustment tool.
Remove:
-
the front air baffle
-
the support between the cylinder block and the intake manifold
-
the mounting screws for the starter motor.
Place the starter motor to one side.
Remove the blind cover plug and cover washer.
Turn the crankshaft clockwise slightly to avoid the adjustment tool being in the wrong position.
Install adjustment tool 999 5451 ADJUSTMENT TOOL See: Tools and Equipment/999 5451 Adjustment Tool. Ensure that the adjustment tool bottoms
out against the cylinder block.
