V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Engine Oil: Removal and Replacement
Replacing the oil and oil filter
Special tools:
999 5679 Oil filter spanner See: Tools and Equipment/999 5679 Oil Filter Spanner
Warning
Warning! Avoid prolonged skin exposure to oil.
-
Extended and repeated contact with oil can cause skin to dry out. This can result in itchiness, dry skin, eczema and other skin complaints.
-
Used oil is more dangerous than new oil.
-
Used oil may contain contaminants that are a health risk.
-
Avoid skin contact, especially with used engine oil.
-
Use protective gloves if necessary.
-
Avoid oil soaked rags and cloths.
-
Wash thoroughly after skin contact with oil, especially before meals
-
Use skin cream to prevent dryness.
Engine oil, draining
-
Remove the drain plug.
-
Replace the copper washer.
-
Install the drain plug and tighten to 35 Nm.
Oil filter, removing
Remove the rear engine splashguard.
Use oil filter wrench 999 5679 Oil filter spanner See: Tools and Equipment/999 5679 Oil Filter Spanner.
Wipe up any oil spillage (use kitchen paper for example).
Remove the oil filter from the housing.
Clean the housing and the engine.
Oil filter, installing
