V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Intake Manifold: Removal and Replacement
Replacing the intake manifold and gasket
Special tools:
951 2666 Replaced by 9997298 See: Tools and Equipment/951 2666 Replaced by 9997298
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparation
Remove the front engine cover if applicable.
Disconnect the battery negative lead. First read Note when disconnecting and connecting the battery lead See: Starting and Charging/Battery/Service
and Repair/Procedures/Battery, Disconnecting.
Drain the fuel injection system. See Draining the fuel injection system See: Powertrain Management/Fuel Delivery and Air Induction/Service and
Repair/Draining the Fuel Injection System.
Removing the fuel rail
Remove:
-
the cover over the ignition coils
-
the crankcase ventilation hose from the top of the cam cover
-
the cover over the throttle body (TB)
-
the protective cover over the nozzle connectors
-
the connectors from the nozzles
-
the vacuum hose for the fuel pressure regulator from the throttle body (TB).
Removing fuel line