V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
-
Disconnect the connections. Seal the openings
-
Clean all mating surfaces
-
Lubricate the O-rings with compressor oil
-
Disconnect the swivel on the firewall. Turn only the swivel. Counterhold with a wrench (the nut is welded)
-
Remove the support for the connector on the firewall
-
Carefully pull the oil pipe out of the clamps. Remove the pipe.
The pipe between the swivel connection and the receiver drier on the firewall
Removal