V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Refrigerant Pressure Sensor / Switch: Procedures
Removing
Drain the Air Conditioning (A/C) system.
Note! Clean the area around the sensor.
-
Remove the battery clamp if necessary.
-
Disconnect the connector.
-
Remove the sensor.
Installing
-
Use a new sealing ring. Lubricate the sealing ring with compressor oil.
-
Install the temperature sensor. Tighten the temperature sensor. Tightening torque 18 Nm.
-
Reconnect the connector.
-
Reconnect the battery clamp.
-
Fill the Air Conditioning (A/C) system.