V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Brake Light Switch: Removal and Replacement
Replacing the stop lamp switch
Conditions
Ignition off.
Remove the panel under the dashboard on the driver's side.
Removing the stop lamp switch
Press the stop (brake) lamp switch, from the side of the connector, completely forwards.
Note! A number of clicks should be heard and felt when pressing.
Disconnect the connector.
Press the brake pedal as far down as possible.
Pull the white bushing (1) as far forward as possible.
Press in the two locking lugs (2) on the reverse. Remove the stop lamp switch.
Stop lamp switch, installation