V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Systems/Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals/Checking Wiring and Terminals. Permanent
Fault.
Check the cable between control module connector F #2 (#B2) and front side marker lamps #1, lighting switch #1, beam height adjustment for the left
and right headlamp #3 and the engine control module (ECM) for a short-circuit to ground according to Checking wiring and terminals. Permanent fault
See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and
Terminals/Checking Wiring and Terminals. Permanent Fault.
Remedy as necessary.
Other information
-
To connect the breakout box, see Connecting the breakout box See: Body and Frame/Body Control Systems/Testing and Inspection/Pinout Values
and Diagnostic Parameters/Connecting The Breakout Box. Central Electronic Module (CEM).
-
For information about signals, see Signal specification See: Body and Frame/Body Control Systems/Testing and Inspection/Pinout Values and
Diagnostic Parameters/Signal Description. Central Electronic Module (CEM).