volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Checking/Adjusting Tracking|Page 4793 > < Ignition Systems - Failed Ignition Key Programming|Page 4790
Page 1
background image

Alignment: Service and Repair
Checking/Adjusting Tracking

To check the tracking correctly: 

-

the car must be unloaded. (the level in the fuel tank makes no difference).

-

Check the tire pressures.

Jack front end of car up. 

-

Jack the wheel arms up as close to the ball joints as possible.

Check front end for play 

-

Check for play in the following:
-

the steering gear housing and the track rod joints

-

the wheel bearings

-

the top spring mountings

-

the ball joints and suspension arm bearing bushes.

-

If there is any play in any of the components above, this must be dealt with first. See the section of this manual concerned.

Setting up test equipment 

-

Set up and calibrate equipment as appropriate.

Checking/Adjusting Tracking|Page 4793 > < Ignition Systems - Failed Ignition Key Programming|Page 4790