V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
-
Check with the vehicle unladen
1.) The maximum permitted difference between the left and right-hand wheels is 40'.
2.) Measure and adjust the camber before adjusting the toe in (Rear side)
-
Adjust the wheel alignment to specification if measured values are outside the tolerance range.
Control adjust values for toe-in
-
Measure the difference between the front and rear edge of the wheels at A-a, B-b or C-c
1.) (alpha) is Toe-in degrees measurement per wheel.
2.) Set the camber first. The settings for the left and right wheels must be the same.
-
Measure the angle at the height of the hub or the differences between the front and rear edges of the wheels at A, B or C.
Adjusting toe-in
