V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
-
Before tightening the shock absorber connections on the RH side PUSH the upper side of the wheel to the inside so that the camber value is
maximum negative see camber specification below.
Torque the shock bolts to 67 ft lbs. (90 Nm).
RH side values maximum permitted negative camber.
LH (left hand side) camber adjustment.
-
Before tightening the shock absorber connection on the LH side PULL the upper side of the wheel to the outside so that the camber value is (0.66°)
more positive than the RH side.
Torque the shock bolts to 67 ft lbs. (90 Nm).
LH side values maximum permitted negative camber.
Road test the car and check the driving properties.
-
If the car pulls to the left during driving lower the permitted camber value on the LH side.
Car pulls to the left during driving.
4.
LH (left hand side) camber adjustment.
-
Before tightening the shock absorber connections on the LH side PUSH the upper side of the wheel to the inside so that the camber value is
maximum negative see camber specification below.
