V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Torque the shock bolts to 67 ft lbs. (90 Nm).
LH side values maximum permitted negative camber.
RH (right hand side) camber adjustment.
-
Before tightening the shock absorber connection on the RH side PULL the upper side of the wheel to the outside so that the camber value is (0.660)
more positive than the LH side.
Torque the shock bolts to 67 ft. lbs. (90 Nm).
RH side values maximum permitted negative camber.
Road test the car and check the driving properties.
-
If the car pulls to the right during driving lower the permitted camber value on the RH side.
Warranty Claim Information
Technical Service Bulletin # TNN60-07
Date: 030829
Steering/Suspension - Vehicle Pulls Left or Right
NO: 60-07
DATE: 8-29-2003
MODEL: S40 V40
M. YEAR: 2000, 2001, 2002, 2003, 2004
CHASSIS: 415000-
SUBJECT: Front End Pulls Left or Right (Camber Adjustment)
REFERENCE: VADIS
DESCRIPTION:
If a front-end pull exists it is now possible to adjust the front camber using camber kit PN 30630515.
SERVICE:
Follow the procedure listed below only after all of the normal fault tracing has been completed.
Installing adjustable camber bolts to restrict pulling to the left or right.
General
1.