V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Connect special tool 998 5433 PULLER PLATE B 12-75 MM See: Tools and Equipment/998 5433 Puller Plate B 12-75 mm and 998 5434
SEPARATOR L 200 MM See: Tools and Equipment/998 5434 Separator L 200 mm.
Connect special tool 999 5310 Drift See: Tools and Equipment/999 5310 Drift to the hub. Pull off the bearing cap.
Remove the sealing ring.
Clean and check the components
When installing a new wheel spindle, a new splash guard must be installed on the wheel spindle.
Secure it in three places with a screwdriver.
Replace the wheel studs
