V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Check that no pins or sockets are damaged on the connector or the control module.
Connect the connector on the control module.
Screw the control module into place.
Reinstall the retaining strap and a new security screw
Finishing
Ordering software
Connect the VIDA station to the car.
Select the model, model year, engine alternative and enter the chassis number in the vehicle profile.
Order and download appropriate software.
Programming the control module
Program the control module. See 9139873.
Reading and erasing diagnostic trouble codes (DTCs)
Read off and erase diagnostic trouble codes (DTCs).
Screw the engine control module (ECM) into place.
Tighten the security screw.
Reinstall the side panels on the left and right-hand sides.
Test the function.
