V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
1. Press the cable terminal in the cavity forwards as far as it will go. This will free the locking tab from the cavity catch.
2. Insert the terminal removal tool in the cavity from the connector side of the housing. The tool presses down the locking tab. This allows the cable
terminal to pass the catch in the cavity.
Hold the terminal removal tool in place.
3. Extract the cable terminal from the cable side of the housing: Pull the cable.
If the cable terminal is stuck, first remove the terminal removal tool.
What NOT to do
