V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Tighten the nut Torque: 25 Nm
-
The lever on the gear shift linkage rod.
Torque: 16 Nm
-
The transmission cable on the lever with a washer and retaining clip. Apply a small amount of grease (P/N 1161241 - 3) to the lever shaft journal.
If the transmission cable is removed it must be adjusted.
Installing other components
Tighten the oil pipe cap nut on the control system cover.
Install:
-
The air cleaner (ACL) housing assembly, see Replacing the air cleaner (ACL).
-
The battery shelf
-
The battery
Filling and checking oil
Top up the transmission with oil. Check the level.
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).