V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Ignition off
Remove:
-
Center console locker or large-fronted radio
-
Ashtray holder (2 screws)
-
Right side panel
-
Remove the control module from the bracket
-
Disconnect the control module connector
-
Remove the control module.
Installing the control module
Check that none of the pins or sockets on the connector are damaged.
-
Install the new control module
-
Ignition on
-
Read off and erase any diagnostic trouble codes (DTCs).
-
Reinstall panels, center console locker etc.
Adapting the throttle position (TP) signal