V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Extracting the Cable Terminal From the Housing/When the Cavity Opening Has Two Extraction Grooves Cavity opening with one extraction
groove See: Extracting the Cable Terminal From the Housing/Cavity Opening With One Extraction Groove Housing with half-open contact side
See: Extracting the Cable Terminal From the Housing/Housing With Half-Open Contact Side Housings with square cavity openings See:
Extracting the Cable Terminal From the Housing/Housings With Square Cavity Openings Housings with round cavity opening See: Extracting
the Cable Terminal From the Housing/Housings With Round Cavity Opening Single terminal housings See: Extracting the Cable Terminal From
the Housing/Single Terminal Housings.
When Secondary Locking Is of the Lid Type
When secondary locking is of the lid type
To open a housing secondary locking of the locking lid/catch type proceed as follows
General instructions
Note that these are general instructions, variations can occur in practice.
Regard the examples shown and the procedures described as guidelines.
Open locking lid/catch