V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
-
Remove the parcel shelf.
-
Angle the seats forward. Pull out the seat belt through the cargo compartment.
-
Remove the seat belt from the body at the side.
-
Remove the mounting screw. Remove the seat belt through the cargo compartment.
-
Install in reverse order.
-
Clean the mounting.
-
Apply locking fluid to the screws.
-
Tighten the screw. Tighten to 48 Nm.
-
Ensure that the new seat belt is not twisted.
Replacing the rear seat belts, 5-door cars
-
Remove the C-post panel.
-
Fold the seats forward.
-
Remove the seat belt mounting from the floor.
-
Remove the screw for the seat belt from the chassis support (between the C and D posts).
-
Install in reverse order.
-
Clean the mounting.
-
Apply locking fluid to the screws.
-
Tighten the screw. Tighten to 48 Nm.
Replacing rear seat belt buckles