V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Turn Signal Switch: Procedures
Wiper and/or Turn Signal Indicator Switch
Replacing/Removing the wiper switch
Remove:
-
the lower steering shaft cover (3 screws).
Move the steering shaft to the lowest position.
-
the steering column upper cover.
-
the switch mounting screws (A).
-
the switch and disconnect the connectors.
Wiper switch, installation
Install:
-
the switch and reconnect the connector.
-
the switch mounting screws (A).
-
the upper and lower steering shaft covers (3 screws).
Turn signal lamp switch, replace
Removing steering wheel module