V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Installing the turn signal lamp switch
-
Install the new switch and tighten using the screws (A).
-
Connect the connectors and install the mounting screws (B) (3x).
Steering shaft covers, installing
Install the upper and lower steering shaft covers (3 screws).
Steering wheel, installation
-
Turn the steering wheel to the horizontal position.
-
Install the center nut and hand tighten.
-
Remove the locking screw and secure it in the parking hole in the steering wheel.
-
Lock the steering wheel lock and tighten the center nut to 43 Nm.
Steering wheel module, installing