V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Use a thin screwdriver with a blade 3-4 mm wide.
-
Work the locking catches/eyes carefully loose on the locking lid or on the housing.
The number of locking catches/eyes and their location varies on different housings. There can also be variations between pin sizes in the housing types.
Caution! Take care that the locking catches/eyes are not broken off when releasing the lid.
-
Unlock and open the locking lid
In multi-pin housings there can be separate locking lid for the upper cavity row and the lower. Only open the locking lid which is locking the cable
terminal which is to be replaced.
Proceed
