V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Note! Do NOT use this type of tool!
Do not use this type of simple direct-acting crimping pliers which are intended for the home repairs and hobby market. The tool does not supply the
necessary force required or meet Volvo quality standards to ensure reliable terminal crimping.
Place the cable terminal in the tool
-
Select the crimping insert for the cable terminal type (see Choice of crimp tool See: Terminal Crimping/Choice of Crimp Tool
-
Locate the cable terminal correctly in the crimping insert.
Check that the cable terminal deformation sections (1) and (2) are in contact with the crimp tool support section (3) and (4). The cable terminal must not
be at an angle or lie to far forwards or to the rear in the crimp tool insert.
-
Carefully apply pressure to the crimp tool until the jaws hold the cable terminal in place without applying sufficient pressure to deform it.
Check the cable terminal is correctly located in the crimp tool jaws
