V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Kick Down Switch: Service and Repair
Replacing the kickdown switch (KD)
Note! Automatic transmission: The kickdown switch is integrated in the throttle cable from and including model year 98 onwards. See
Replacing the throttle cable See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Cable/Linkage/Service and Repair.
Removal
Separate the connector.
Fold up the rubber cap on the kickdown switch (KD).
Press in the lugs on the switch. Remove the switch from the holder.
Installation
Install a new switch. Ensure that the lugs engage.
Fold down the rubber cap. Connect the connector.
Checking diagnostic trouble codes (DTCs)