V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Transmission Speed Sensor: Removal and Replacement
Replacing the speed sensor
Preparations
Ignition off.
Remove:
-
The air cleaner (ACL) housing assembly, see Replacing the air cleaner (ACL) See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair/Removal and Replacement.
-
Cut the tie straps for the cable harness at the bracket for the connectors
-
The screws for the bracket for the connectors
Replacing the sensor
Clean thoroughly around the sensor.
Remove the sensor and separate the connector.
Install:
-
The new sensor with a new O-ring. Lubricate the O-ring with automatic transmission fluid.
-
Tighten the screw.
Torque: 5.5 Nm.
Installing components