V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Position the ventilation hose between the EVAP hose and the fender liner. Route the hose under the vehicle.
Install the hose clamps (A). Secure the hose clamps in the holes (D and E).
Note! Ensure that the ventilation hose is not trapped.
Removing and Installing Batteries
Removing and installing batteries
Removing and installing batteries
Removal
-
Always disconnect the battery negative lead first. This is to prevent spark build up when removing the battery.
Installation
-
Connect the positive terminal first. Apply acid resistant grease (P/N 1 161 150-6) to the battery posts where the clamps were screwed into place.
