V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
First - check the following steps before installing the adjustable camber bolts.
1)
Road test the car to verity the complaint.
2)
Check the air pressures in all the tires.
3)
The tires should all be in good condition with even wear patterns.
4)
Check front and rear suspension for wear.
5)
Pulling problems can also be caused by the power steering or brakes.
6)
Check the four-wheel alignment always start at the rear (see wheel alignment specifications).
Install the adjustable camber kit only after the steps listed above have been ruled out as a fault.
Use adjustable camber bolts service kit
P/N 30630515
Car pulls to one side during driving.
2.
-
Install and calibrate the alignment equipment according to the user manual.
Note! Always use four wheel alignment equipment.
-
Raise the car.