V40 L4-1.9L Turbo VIN 25 B4204T2 (2000)
Position a container under the steering gear to collect the oil.
Release the oil container and both the hose mountings.
Drain as much oil as possible out of the fluid reservoir.
Use 115 8957 HOSE PLIERS See: Tools and Equipment/115 8957 Hose Pliers on the return hose as close to the fluid reservoir as possible.
Remove the pipe clamp positioned on the left-hand side of the steering gear housing.
Remove the hose and allow the oil to run out into a container. Immediately plug the pipe connections on the steering gear housing.
Connect a hose between the outlet on the steering gear housing and the container if the entire system is to be drained.
Remove the lock grip pliers from the return hose.
Removing the return line
